EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 211)

Call channel VGA
Description Enables or disables the Call Channel function on the VGA
Clip screen. This function allows the operator to select on
which PGM channel the clips called from the keyboard/tablet
and VGA should be loaded.
Values Yes / No
Default value Yes
PGM/PRV mode
Description Allows the user to select the PGM/PRV mode on the LCD
display as a function accessible from the A button on the
Remote Panel’s main menu.
Otherwise, the PGM/PRV mode selection is not accessible
from the A button.
Values The following values are possible:
• Yes: The PGM/PRV mode is available from the A key on
the Remote Panel.
• No: The PGM/PRV mode is not available from the A key
on the Remote Panel.
Default value Yes
Internal loop mode
Description Defines which components of PGM1 output must be recorded
back into the server when the Loop mode is engaged.
Values The following values are possible:
• Video + Audio:
Both video and audio signals of PGM1 are recorded back
into CAM A input..
• Video only:
Only the video signal of PGM1 is recorded back into CAM
A input. This allows the operator to continue the record of
live audio tracks during the Loop process. This can be
useful to add music, voice or live sound to an edit for
example.
Default value Video + Audio
Note
In audio embedded, the audio is always looped, whether the loop mode is set to
Video + Audio or Video only.
201 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B