EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 29)

In the Web-Based Interface
Note
In the web-based interface, it is only possible to import configuration lines one by
one.
To import configuration lines onto an EVS server in the web-based interface, proceed as
follows:
1. From the Multicam Setup window, click Import configuration lines in the Tools menu.
The Import configuration line window opens.
2. Click Select next to the top field and select the configuration file you want to import.
3. Tick the configuration line to be replaced on the EVS server.
4. Click Import.
The configuration line is imported with its original name onto the selected configuration
line on the EVS server.
19 2. Multicam Setup
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B