Genlock error, Disk error – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 148
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the OSD settings area:
Genlock Error
Description
Enables or disables the Genlock information display on the
output monitor.
If the Genlock reference is not correct, the !GkV message
appears on the output monitor.
Values
Yes (default) / No
Disk Error
Description
Enables or disables the disk error information display on the
output monitor.
As the server is equipped with a RAID disk array, the operation
can continue seamlessly even with 1 faulty disk. If 1 disk is
disconnected during operation, the !Raid message appears on
all output monitors, and another message appears when the
operator shuts down the application, to invite him to replace
the disk and rebuild the RAID array.
Please, refer to the Technical Reference manual for details on
the RAID system and its maintenance.
Values
Yes (default) / No
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
138