Audio embedded outputs, Audio digital outputs (aes/ebu), Audio analog outputs – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 121: Audio output settings, Description, Display
Audio Output Settings
Description
The audio output settings for audio allow users to:
•
map the audio mono channels of the material stored on the EVS server to an output
mono channel of a play channel.
•
specify which audio gain should be applied to each output mono channel.
•
mute an output mono channel.
This can be defined for the three audio types: embedded audio, as well as digital and
analog audio, if the corresponding connectors are available on the hardware configuration.
Display
The following screenshots show the default audio channel assignment for the three audio
types in a configuration with 8 mono channels, 16 digital audio connectors, and 8 analog
audio connectors
See section "Default Mapping for Audio Inputs and Outputs" on page 113 for a full
overview on the default mono channel assignment in the various supported
configurations.
111
3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012
Issue 11.01.B