Name, Main ctrl (main controller) – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 104
The following screenshot highlights the Channel and Control settings, defined on page 1
of the Channels tab in the server-based application:
Name
Description
User-defined name for play or record channel. This name will
be used for the OSD, and in the IPDirector application suite.
The name can contain maximum 24 characters.
Main ctrl (Main Controller)
Description
Name of the main device/controller allowed to control the given
play or record channel.
Values
For a controller to be available in the list of values, it must first
be assigned to an RS422 port in the port settings.
In addition, rules specific to each controller apply to the
assignment of the controller (used alone or in combinations
with other controllers) to play or/and record channels. See
section "Rules for Controller Assignment" on page 96 for more
information.
An error message will be displayed to warn you in case of a
wrong protocol selection or protocol combination, and the
fields that contain errors will be highlighted in red.
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
94