Channel assignment, Clip and record train compatibility on xt2 servers – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 67
Channel Assignment
The following general principles apply to all configurations, and are valid for all EVS
servers equipped with COHX boards:
•
The record channels (IN connectors) are always assigned from the right to the left.
•
The play channels (OUT connectors) are always assigned from the left to the right.
Clip and Record Train Compatibility on XT2 Servers
•
Clips are compatible across all Multicam configurations including Super LSM.
•
Record trains are also compatible as long as the number of record channels (cameras)
is not increased in LSM mode.
Example
◦
SuperLSM ® 2CAM (Fx): Record trains are lost.
◦
4CAM (Fx) ® 3CAM (Cut): Record trains are kept.
•
Record trains are always kept in Spotbox mode (all modes except LSM), even when
the number of record train s is increased.
57
3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012
Issue 11.01.B