EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 167)

VarID Definition and Parameters
The VarID is a 32-bytes ID with variable length and format. The VarID settings enable
VDCP protocol to use the VarID to access the clip IDs on a server or on the XNet
network.
This page in the Multicam Configuration menu only displays the parameter values. These
values are extracted from the ‘varid.ini’ file and can only be changed by editing this
external file. In case of error or undefined values, the corresponding parameter default
value is used.
Note
If any of the VarID settings does not correspond to the network defined values
set on the XNet, the server will be disconnected from the network and operate in
local mode. In this case:
• The Multicam Configuration window clearly displays the message !Not XNet
common value! next to the incorrect parameter.
• A message is displayed on the SDTI network monitoring screen indicating
the incorrect parameter.
157 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B