Example 2, Example 3, Example 4 – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 120
Example 2
The allocation of the source audio mono channels shown above means that:
•
The embedded audio source of the 1st mono channel of the record channel (IN1 or
IN2) will be stored on mono channels 1 to 4 of the recorded material.
•
The embedded audio source of the 5th mono channel of the record channel (IN1 or
IN2) will be stored on mono channels 5 to 8 of the recorded material.
Example 3
The allocation of the source audio mono channels shown above means that:
•
The audio source from the digital connectors is used for the material recorded on the
EVS server.
•
The audio source 1 from the digital connector will be mapped to the 1st mono channel
of the material recorded on the EVS server, and so on.
Example 4
You will allocate the source audio mono channels as shown above when you want to send
the audio mono channels from REC1 to all other record channels.
The shortcut CTRL+0 allows you doing this more rapidly in the server-based application.
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
110