EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 20
Configuration Lines
In the Configuration Lines area, a configuration line is highlighted when it is selected.
The main commands for configuration line management are presented below:
Command description
Command key
Moving up in the list of configuration lines
UP ARROW
Moving down in the list of configuration lines
DOWN ARROW
Starting the server with a given configuration line
ENTER on selected line.
Entering the Configuration window to edit the settings
related to a selected line
F8
Renaming a configuration line
CTRL + F1
Deleting a configuration line
CTRL + DELETE
See section "Configuration Lines" on page 11 for more commands on configuration lines.
Tools Menu
Command description
Command key
Selecting a tool command
Pressing the shortcut key
(between brackets in the
command name)
Calling a tool command
ENTER on the selected
command
In the Web-Based Interface
Note
To be sure that changes have been taken into account in the web-based
interface, refresh regularly the page by clicking the Refresh button
in the
status bar.
XT2 Server - Version 11.01 - Configuration Manual
2. Multicam Setup
10