Gpis in - delay, Gpis out - function, Gpis out - type – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 174: Gpis out - advance
GPIs IN - Delay
Description
Specifies the time (number of seconds and/or frames) that the
server will wait after receiving the input signal before executing
the input-related function.
Values
•
00s00fr to 02s00fr
•
Disable
Default value
Disable
GPIs OUT - Function
Description
Specifies the function that activates the output line.
Values
The following functions can be triggered by a GPI OUT:
•
Replace
GPIs OUT - Type
Description
Specifies the type of GPI output signal that will trigger the
specified function.
Values
The following values are possible:
•
close
The level changes to high level at
activation.
•
close
pulse
A rising edge pulse is generated at
activation.
•
open
The level changes to low level at
activation.
•
open
pulse
A falling edge pulse is generated at
activation.
GPIs OUT - Advance
Description
Defines the time (number of seconds and/or frames), at which
the output will be generated ahead of the timecode linked to the
output line.
Values
•
00s00fr to 02s00fr
•
Disable
Default value
Disable
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
164