EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 175)

GPIs OUT - Pulse duration
Description Defines the pulse duration (number of seconds and/or frames)
for pulse type output lines.
Values • 00s00fr to 02s00fr (2fr steps)
• Disable
Default value Disable
3.8.3. Tally Settings
Introduction
The Tally settings allow specifying the settings related to the tally feature. This feature
allows the user to automatically create a clip for each change of camera performed with
the Director’s Cut and to add these clips to a playlist. The clips are created automatically
by the server as it receives GPIs IN signals from a switcher when the director changes
the camera angle.
These fields are available in the following interfaces:
• in the Multicam Configuration window, GPI tab.
• in the Technical menu of the Remote Control Panel (T6.X).
The following screenshot presents the settings page of the Monitoring tab in the server-
based application and highlights the Tally settings area.
165 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B