Acer AB460 F1 - Manual (Page 142)

3 Server Blades: Setup and Installation 122
Configuration - Network Settings
This feature allows you to configure network settings. When you click
on the Network icon in the Options window (1), the following screen
will display.
Figure 3-76. Network Settings
1 Network: This item allows you to view or modify network settings.
2 MAC Address: Enter the MAC address for networking in the box.
Check the first radio button to obtain an IP address automatically
by using DHCP (Dynamic Host Configuration Protocol).
Check the second radio button to use the IP address entered
below.
3 IP address: If the second radio button above is checked, please
enter your IP address in the box.
4 Subnet Mask: Enter the address for the subnet mask of your
network.
5 Default Acer: Enter the IP address for the default gateway of your
network.
6 Primary DNS Server: Enter the IP address of your primary domain
name server.
7 Secondary DNS Server: Enter the IP address of your secondary
domain name server.
8 Enable VLAN: Check this box to enable Virtual LAN support
1
2
3
4
5
6
7
8
9