Acer AB460 F1 - Manual (Page 454)

4 Networking Switch Modules 434
BGP Filter
Clicking the F
ILTERS
tab brings up the BGP F
ILTER
C
ONFIGURATION
page,
which is used to set the filters on the routes being learnt. The
parameters for this page are shown in the following table.
Parameter Description
Filter ID This parameter specifies the filter index.
Remote AS This parameter specifies the remote AS associated with
the BGP peer from which the router is being
distributed.
IP Address This parameter specifies the IP address for which the
route is being learnt.
IP Address Prefix
Length This parameter specifies the prefix length to calculate
the Subnet.
Intermediate AS This parameter represents the intermediate AS
between the BGP peers.
Direction This parameter indicates the direction of the packet.