Acer AB460 F1 - Manual (Page 334)

4 Networking Switch Modules 314
SNMP User Settings
Clicking the U
SER
tab brings up the SNMP S
ECURITY
S
ETTINGS
page, which
configures users configured in the SNMP for the User-based Security
Model. The parameters for this page are shown in the following table.
Security Level S
ECURITY
L
EVEL
specifies the level of security used when
generating SNMP messages.
Storage Type S
TORAGE
T
YPE
can be configured as Volatile or Non-
Volatil
E
.
Figure 4-198. SNMP Security Settings
Parameter Description
User Name U
SER
N
AME
is the (User-based Security) model
dependent security ID.
Authentication
Protocol The A UTHENTICATION P ROTOCOL is used for
authentication.
Parameter Description