Acer AB460 F1 - Manual (Page 441)

421
OSPF V3
The OSPFv3 link allows you to configure the OSPFv3 protocol through
the following pages:
•
“OSPFv3 Basic Settings” on page 421
• “Interface” on page 423
• “Area” on page 425
• “OSPF V3 External Aggregation” on page 426
OSPFv3 Basic Settings
Clicking the B
ASIC
S
ETTINGS
tab brings up the OSPF
V
3 B
ASIC
S
ETTINGS
page. The parameters for this page are shown in the following table.
Parameter Description
OSPFv3 Status This parameter enables or disables OSPFv3
administratively.
Router ID This parameter uniquely identifies the router in the
Autonomous System.
Autonomous
System Border
Router Status This parameter specifies the router as Autonomous
System border router.