Syslog mail configuration – Acer AB460 F1 User Manual
Page 318
4 Networking Switch Modules
298
Syslog Mail Configuration
Clicking the M
AIL
tab brings up the S
YSLOG
M
AIL
C
ONFIGURATION
page,
which allows you to configure the mail server and mail addresses for
the syslog feature. The parameters for this page are shown in the
following table.
Facility
This parameter allows you to select supported facilities.
The switch supports syslog standard supported facilities
LOCAL
0,
LOCAL
1,
LOCAL
2,
LOCAL
3,
LOCAL
4,
LOCAL
5,
LOCAL
6,
LOCAL
7 and
USER
.
Traps
This parameter helps you to select a particular trap
type. The following types of traps are supported
A
LERTS
, C
RITICIAL
, D
EBUGGING
, E
MERGENCIES
, E
RROR
,
I
NFORMATIONAL
, N
OTIFICATION
and W
ARNINGS
.
Figure 4-186. Syslog Mail Configuration
Parameter
Description
Mail Server IP
Address
This parameter specifies the IP address of the mail
server. Make sure the mail server is reachable.
Sender Email ID
This parameter specifies the Email ID to be shown as
the From address on Syslog Emails.
Parameter
Description