Acer AB460 F1 - Manual (Page 422)

4 Networking Switch Modules 402
Interface Settings
Clicking the I
NTERFACE
C
ONF
tab brings up the DHCP R
ELAY
I
NTERFACE
C
ONFIGURATION
page, which allows you to configure the DHCP relay for
VLANs. The parameters for this page are shown in the following table.
Parameter Description
Service DHCP-Relay This parameter specifies the DHCP relay status that can
be enabled or disabled in the switch using this field.
IP DHCP Relay
Information Option You can enable/disable this field to control the
processing related to the Relay Agent Information
options.
DHCP Server
Address This parameter indicates the IP address of the DHCP
Server to which the Relay Agent needs to forward the
packets from the client.
Parameter Description
VLAN Interface This parameter specifies the VLAN Interface name.