Acer AB460 F1 - Manual (Page 421)

401
DHCP Relay
The DHCP Relay link helps you to manage the DHCP relay in the switch
through the following two pages:
•
“DHCP Relay Basic Settings” on page 401
• “Interface Settings” on page 402
DHCP Relay Basic Settings
Clicking the B
ASIC
S
ETTINGS
tab brings up the DHCP R
ELAY
C
ONFIGURATION
page, which displays the various parameters for configuring the DHCP
relay. The parameters for this page are shown in the following table.
Lease Time This parameter specifies the time interval for which the
IP address is valid.
Utilization
Threshold This parameter specifies the DHCP Pool Utilization
Threshold value.
Status This parameter specifies the status of the entry.
Parameter Description