Acer AB460 F1 - Manual (Page 349)

329
NTP Status This field enables or disables NTP in the switch.
Configure the NTP S
ERVERS
section to enable NTP.
Receive Server
Update The value for this parameter could be Broadcast or
Unicast . To process the broadcast NTP updates from
the server, choose the Broadcast option.
Timezone Settings
Hour Offset This parameter allows you to enter an hour offset from
GMT for local time.
Minutes Offset This parameter allows you to enter a minutes offset
(after hour offset) from GMT for local time.
NTP Servers
Server IP Address Use this parameter to enter the NTP server IP address.
Key Choose the key from the configured list. These keys are
configurable in this page in the NTP S
ERVER K EYS
section’s fields.
Interval This parameter allows you to choose the interval from
the given list.
Preferred This parameter allows you to choose the preferred
server. Choose
Yes if this server needs to be preferred
over other configured NTP servers. You can add
multiple NTP servers.
NTP Servers Keys
Key ID Use this parameter to select a number to identify the
configured key strings.
Key String Use this paramter to specify any string to be used as a
key to handshake with NTP servers.
Parameter Description