Acer AB460 F1 - Manual (Page 242)

3 Server Blades: Setup and Installation 222
While the BIOS is in control, the Setup program can be activated in one
of two ways:
1. By pressing <F2> immediately after turning the system on, or
2. When the message Press the <F2> key to enter Setup appears briefly
at the bottom of the screen during the POST, press the <F2> key to
activate the main S
ETUP
menu:
Main BIOS Setup
All Main Setup options are described in this section.
Use the U
P
/D
OWN
arrow keys to move among the different settings in
each menu. Use the L
EFT
/R
IGHT
arrow keys to change the options for
each setting.
Press the <E
SC
> key to exit the CMOS S
ETUP
menu. The next section
describes in detail how to navigate through the menus.
Items that use sub-menus are indicated with the  icon. With the item
highlighted, press the <E
NTER > key to access the submenu.
Menu options found in the M
AIN
BIOS S
ETUP
menu are shown in
Figure 3-139 and described thereafter.