Acer AB460 F1 - Manual (Page 386)

4 Networking Switch Modules 366
MSTP
The MSTP link leads you to the following configuration pages:
•
“MSTP Basic Settings” on page 366
• “MSTP Timers” on page 368
• “Port Configuration” on page 369
• “VLAN Mapping” on page 370
• “Port Settings” on page 371
• “CIST Port Status” on page 372
MSTP Basic Settings
Clicking the B ASIC S ETTINGS tab brings up the G LOBAL C ONFIGURATION
page, which can access the MSTP global configuration. The parameters
for this page are shown in the following table.
Parameter Description
System Control This parameter Starts or Shutsdown MSTP in the
switch.
MSTP Status This parameter specifies the protocol that can be
enabled/disabled at a global level on the switch using
this field.