Acer AB460 F1 - Manual (Page 333)

313
SNMP Target Parameter Settings
Clicking the T
ARGET
P
ARAMETER
tab brings up the SNMP T
ARGET
P
ARAMETER
S
ETTINGS
page, which configures SNMP Target Address
parameters. The parameters for this page are shown in the following
table.
Figure 4-197. SNMP Target Parameter Settings
Parameter Description
Parameter Name The target parameter is an unique name that specifies
SNMP target information to be used in the generation
of SNMP messages.
MP Model The Message Processing (MP) Model is used when
generating SNMP messages using this entry.
Security Model The S
ECURITY
M
ODEL
is used when generating SNMP
messages using this entry.
Security Name The S
ECURITY
N
AME
identifies the current P
ARAMETER
N
AME
, on whose behalf SNMP messages will be
generated.