Acer AB460 F1 - Manual (Page 434)

4 Networking Switch Modules 414
Interface
Clicking the I
NTERFACE
tab brings up the OSPF I
NTERFACE
C
ONFIGURATION
page. The parameters for this page are shown in the following table.
Parameter Description
Interface This parameter specifies the interface index of the
port.
Area ID This parameter indicates the 32-bit integer uniquely
identifying the area to which the interface connects.
Priority This parameter specifies the priority of this interface,
which is used in the DR election algorithm.
Authentication Type This parameter allows you to choose MD5 , Simple
Password or None as the authentication type.
MD5 Key ID This parameter specifies the secret key used to create
the message digest appended to the OSPF packet, if
the authentication type is
MD5 .