Acer AB460 F1 - Manual (Page 387)

367
Compatibility This parameter allows you to choose to run the
protocol in
MSTP , RSTP or an STP compatible version.
Bridge Priority This parameter specifies the Priority value assigned to
the bridge that is used to select the root bridge.
Transmit Hold
Count This parameter specifies the maximum number of
packets that can be sent in a given interval. This is
configured to avoid flooding.
Default Path Cost
Version This parameter allows you to configure the path cost
either as a
16-bit value or a 32-bit value. This is
provided mainly for backward compatibility with STAP.
Maximum Age
(Seconds) This parameter specifies the time period for which the
information received in the RSTP BDPU is valid.
Forward Delay
(Seconds) This parameter specifies how fast a port changes its
Spanning state when moving towards the Forwarding
state.
Hop Counts
(Seconds) This parameter specifies the maximum number of
bridges that a packet can cross before it will be
dropped, to avoid infinite looping of the packets.
Region Name This parameter specifies the name for the Region's
configuration. By default, the region name will be
equal to the Bridge MAC Address.
Region Version This parameter specifies the version number of the
configuration to be used.
Parameter Description