Acer AB460 F1 - Manual (Page 79)

59
7 Secondary DNS
Server IP
Address Enter the IP address of the Secondary Domain
Name Server in the box. It will be used when the
Primary DNS Server cannot be contacted.
8 Remote
Console &
HTTPS Port Enter the port numbers the remote host and the
HTTP server are listening. If a number is not
entered in the box, the default value will be used.
9 HTTP Port Enter the port number the of the HTTP server. If a
number is not entered in the box, the default
value will be used.
10 SSH Port Enter the port number of the SSH server. If a
number is not entered in the box, the default
value will be used.
11 Bandwidth
Limit Enter the maximum bandwidth value for network
interfacing. The value should be in Kbits per
second.
12 Enable SSH
Access Click this box to enable SSH access.
13 Disable Setup
Protocol Check this box to disable the setup protocol
function of the Ethernet switch module.
14 LAN Interface
Speed Click on the arrow on the right to select a desired
LAN interface speed from the pull-down menu.
The options are Auto-detect, 10 Mbps or 100
Mbps. If Auto-detect is selected, the optimized
speed will be set based on the system
configurations detected by the OS.
15 LAN Interface
Duplex Mode Click on the arrow on the right to select a desired
LAN interface duplex mode from the pull-down
menu. The options are A
UTO - DETECT , H ALF D UPLEX
and F ULL D UPLEX . If Auto-detect is selected, the
LAN I NTERFACE D UPLEX M ODE will be set to the
optimized setting based on the system
configurations detected by the OS.
Item Name Description