Acer AB460 F1 - Manual (Page 338)

4 Networking Switch Modules 318
Clicking the B
ASIC
S
ETTINGS
tab brings up the RMON B
ASIC
S
ETTINGS
page,
which enables/disables the RMON feature using the RMON Status
parameter.
Event Configuration
Clicking the E
VENTS
tab brings up the E
VENT
C
ONFIGURATIONS
page, which
configures RMON events. The parameters for this page are shown in
the following table.
Figure 4-202. Event Configurations
Parameter Description
Index This parameter specifies the index to the Events table.
Description This parameter specifies a brief description of the
event.
Type This parameter specifies the event configured. This can
be a
Log , an SNMP Trap , Both , or None . For the event
type to display, TRAP and Log and TRAP Community
must be configured.