Acer AB460 F1 - Manual (Page 323)

303
Ports List
(Incoming) This parameter specifies the Incoming Port List for
which the filter has to be applied.
Ports List
(Outgoing) This parameter specifies the Outgoing Port List for
which the filter has to be applied.
Protocol This parameter specifies the type of protocol.
Message Code This parameter specifies the Message Code to be
checked for ICMP Packets.
Message Type This parameter specifies the Message Type to be
checked for ICMP Packets.
Priority This parameter specifies the Priority for the filter.
TOS This parameter specifies the Type of Service for the
access list.
ACK Bit This parameter indicates the TCP Ack Bit to be checked
against the incoming packet.
RST Bit This parameter indicates the TCP Reset Bit to be
checked against the incoming packet.
Source Port (Min) These parameters specify the range of TCP/UDP
sourceports from which the access list must be applied.
Source Port (Max)
Destination Port
(Min) These parameters specify the destination ports to
which the access list must be applied
Destination Port
(Max)
Parameter Description