Acer AB460 F1 - Manual (Page 436)

4 Networking Switch Modules 416
OSPF Neighbor
Clicking the N
EIGHBOR
tab brings up the OSPF N
EIGHBOR
C
ONFIGURATION
page, which allows you to configure OSPF neighbors. The parameters
for this page are shown in the following table.
Parameter Description
Transit Area ID This parameter specifies the transit area that the
virtual link traverses.
Neighbor Router ID This parameter specifies the router ID of the virtual
neighbor.
Authentication
Type This parameter allows you to choose MD5 , Simple
Password or None as the authentication type.
MD5 Key ID This parameter specifies the secret key used to create
the message digest appended to the OSPF packet if the
authentication type is
MD5 .
Authentication Key This parameter specifies the key required for
authentication, if authentication is enabled on this
interface.