Acer AB460 F1 - Manual (Page 390)

4 Networking Switch Modules 370
VLAN Mapping
Edge Status This parameter must be configured if the
corresponding port is an edge port.
Point-to-Point
Status This parameter allows you to configure the ports
explicitly as point-to-point (
Force true), as a non-point-
to-point port, or leave the decision to be made
dynamically (from the AL or MAC layer).
Hello Time
(Seconds) This parameter specifies the administrative value of
Hello Time for the port.
Auto Edge Status If set to True , the edge port status will be dynamically
calculated.
Restricted Role This parameter specifies the Restricted role status of
the port.
Restricted TCN This parameter indicates the Restricted TCN status of
the port.
Parameter Description