Acer AB460 F1 - Manual (Page 370)

4 Networking Switch Modules 350
Port Settings
Clicking the P
ORT
S
ETTINGS
tab brings up the VLAN P
ORT
S
ETTINGS
page,
which is used to associate the VLAN ID to the port for Port based VLAN
classification.
While associating different ports to VLANs, you can also configure
I
NGRESS
F
ILTERING
(at the port level) and A
CCEPTABLE
F
RAME
T
YPES
(accept
Tagged Frame Alone or All frames).
The other configurations provided in this page are, enabling/disabling
per Port MAC based classification and Port Protocol based
classification, enabling/disabling of tunneling and enabling/disabling
of STP BPDU Tunneling. To enable STP BPDU Tunneling on an
interface, you must first enable tunneling on that interface.