External aggregation – Acer AB460 F1 User Manual
Page 439
419
External Aggregation
Clicking the E
XT
A
GGREGATION
tab brings up the OSPF A
S
E
XTERNAL
A
GGREGATION
C
ONFIGURATION
page, which allows you to configure OSPF
external aggregation parameters. The parameters for this page are
shown in the following table.
Advertise
This parameter specifies the advertise option as
Advertise Matching
or
Do Not Advertise Matching
.
External Tag
This parameter is not used by the OSPF protocol itself.
It may be used to communicate information between
AS boundary routers. The precise nature of this
information is outside the scope of OSPF.
Parameter
Description
Network
This parameter specifies the external network address.
Mask
This parameter specifies the network mask.
Area ID
This parameter specifies the Area identifier.
Parameter
Description