Acer AB460 F1 - Manual (Page 561)

541
firmware image. Accessing the Switch Firmware through the Web-based
Management Utility
1. Enter the IP address of the switch into the address bar of your
browser and hit <E
NTER
>.
2. On the next screen, click on the S
YSTEM
link on the list on the left.
The window to the right shows you the current firmware version
and provides an U
PGRADE link.
3. Click on the U
PGRADE
link to update your firmware. A Rescue ROM
socket is also included on the PCB that allows you to reinstall the
firmware with a pluggable chip.
4.
Booting using a Fallback Firmware Image:
Use the procedure below to boot using a fallback firmware image.
1. Reboot the switch by power cycling the switch power.
2. During reboot, press any key when it displays the below text (as
shown).
Hit any key to stop autoboot: 5