Multichannel Systems Roboinject Manual - Manual (Page 21)

Roboinject
17
3.6 Main Menu
For maximum flexibility all relevant parameters for the injection can be changed by the user
via main menu.
Note: The preset default values have been extensively tested with RNA and DNA injection of
Xenopus oocytes and should work in most circumstances. Therefore, it is advisable to use the
default values for the first injections with Xenopus oocytes.
File
Menu for creating new files, opening existing files, and for saving them. Menu for opening
and saving templates, and for closing the program.
The option "Export to Roboocyte1" is a feature for exporting plates to the Roboocyte1 device
from Multi Channel Systems MCS GmbH.
Well plate files, created and saved with Roboinject software, can be transferred to the data base
of Roboocyte1 software. The corresponding well plates, injected with the Roboinject device can
be processed with the Roboocyte1 device. The feature is available only for owners of Roboocyte1
devices (Clamp Amplifier A and Clamp Amplifier B) and together with Roboinject software
version 1.1.0 which includes a firmware update. It is not possible to export plates to other devices.