Multichannel Systems Roboinject Manual - Manual (Page 43)

Roboinject
39
To control the ongoing injection process you can choose between three possibilities:
Click "Continue" to continue with injection process.
Click "Cancel" to stop the injection process. The carrier and the injection mount will
automatically move to home position.
Click "Stop" to stop the injection process without any movement of carrier or z-axis.
This is useful in case of severe malfunctions which could possibly lead to damages
if further movements would be performed.
After a successful injection process the Roboinject software displays
the "Injection Finished" dialog.
Click "OK" to continue with the same well plate, or remove the plate and click "OK".
"Log File" Window
The log file is displayed in the "Log File" window. The "Log" file documents the injection
process. To save the log file, click the "Save Log" icon. The log file has the extension
"*.log". To delete the log file, please click the icon "Clear Log" .. If you save the log file,
the "Save As" dialog will open. Please browse through your folders, and define the directory
you want to store the log file.