Multichannel Systems Roboinject Manual User Manual

Page 31

Advertising
background image

Roboinject

27

Click "Set Plate to Manually Injected".

When you are using the Roboocyte1 device from Multi Channel System MCS GmbH and you
decide to inject manually, or if you performed manual injection with Roboinject for other reasons,
you can define the oocytes of a well plate as "injected" with this function.

Click "File" menu “New” to create a new plate. Fill in the respective information about the well
plate, created and injected in Roboocyte1.

Define the samples which were used for injection in Roboocyte1 device.

Define the respective wells in the plate view.

Right-click on each well to document the information about the injection of the cells in the “Set
Injection Parameter” dialog. After that click the option “Set Plate to Manually Injected”, and the
wells - already injected in Roboocyte1 - are marked as injected with black arrows. After doing so,
please save the file. Then you can create and print a report about a well plate, which can not be
created in Roboocyte1 software. The feature is available only for owners of Roboocyte1 devices
(Clamp Amplifier A and Clamp Amplifier B) together with Roboinject software version 1.1.0 which
includes a firmware update.

Advertising