Multichannel Systems Roboinject Manual - Manual (Page 46)

Roboinject Manual
42
3.10 Well Plate View
This prominent "Well Plate View" shows a 96 well plate. When using a 384 well plate,
this view is automatically adapted.
Click the "Void Well" icon . To select or deselect a single well, please click onto the respective
well. To select or deselect complete rows or columns, click onto a letter on the left side to mark
a horizontal row, or onto a digit on top to mark a column. Deselected wells are crossed out,
and will not be injected. The well H12 is deselected by default. It is used for the alignment tool,
please read chapter "Alignment" for more information.