Name and description of each part, Teledyne analytical instruments, 1 description of each unit – Teledyne 7500 - Infrared gas analyzer - operating manual User Manual
Page 9
9
Model 7500 Instruction Manual
Teledyne Analytical Instruments
2. NAME AND DESCRIPTION OF EACH PART
2.1 Description of each unit
Name
Description
1. Handle
Draws the analyzer unit from the case.
2. Power switch
Turns ON/OFF this analyzer.
3. Switch for back light
Turn ON/OFF the back light of display.
4. Display / Operation panel
Liquid crystal display and keys for various
operational settings are arranged.
5. Sampling gas inlet
Port for connecting the sample gas injection pipe.
6. Sampling gas outlet
Port for connecting the pipe for discharging the
gas after analysis.
7. Purge gas inlet
Port for connecting the purge gas pipe.
8. Terminal block 1
Analog output terminals
9. Terminal block 2
Analog signal and contact input terminals
10. Terminal block 3
Contact output terminals
11. Terminal block 4
Contact output terminal
12. Terminal block 5
Alarm output terminal
13. Connector 2
Communication interface
14. Power inlet
Used to connect the power cable.