ADTRAN 600R User Manual

Page 13

Advertising
background image

Total Access 600 Series System Manual

Table of Contents

61200624L1-1B

© 2004 ADTRAN, Inc.

13

Table of Contents

Section 1

System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

This section provides an overview of the Total Access 600 Series system.

Section 2

Engineering Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

This section provides equipment dimensions, power requirements, front panel design, rear panel
design, LEDs, and at-a-glance specifications.

Section 3

Network Turnup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

This section provides shipment contents list, grounding instructions, mounting options, and spe-
cifics of supplying power to the unit.

Section 4

User Interface Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

This section of ADTRAN’s Total Access 600 Series System Manual is designed for use by net-
work administrators and others who will configure and provision the system. It contains infor-
mation about navigating the VT100 user interface, configuration information, and menu
descriptions.

Section 5

Detail Level Procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183

DLP-1

Connecting a VT100 Terminal or PC to the CRAFT Port . . . . . . . . . . . . . . . . . . . . . 185

DLP-2

Logging in to the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187

DLP-3

Setting IP Parameters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 189

DLP-4

Verifying Communications Over an IP LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191

DLP-5

Connecting to the Unit Using Telnet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 195

DLP-6

Adding/Removing Users and Changing Password Security Levels . . . . . . . . . . . . . . 199

DLP-7

Updating the Firmware using TFTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

DLP-8

Updating the Firmware using XMODEM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207

DLP-9

Saving the Current Configuration Using TFTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 209

DLP-10

Loading a Configuration Using TFTP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

DLP-11

Saving and Transferring a Current Configuration Using XMODEM. . . . . . . . . . . . . 213

DLP-12

Loading a Configuration Using XMODEM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

DLP-13

Saving and Loading Text Configuration using Terminal Command Line . . . . . . . . . 217

DLP-14

A.03 to A.04 Firmware Upgrade. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 221

DLP-15

Using the ADTRAN Utility Syslog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223

DLP-16

Executing Terminal Mode Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 227

DLP-17

Configuring Dual T1 Maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

DLP-18

Unit Installation Using the Auto-Config Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

DLP-19

TDM to ATM Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 239

Section 6

ADTRAN Utilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

This section provides instructions for configuring and using the ADTRAN Utilities software
programs including Telnet, VT100, Syslog, and TFTP.

Section 7

MIBs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253

This section is divided into two parts: (1) SNMP information for TDM units and (2) SNMP in-
formation for ATM units. Each section details the Management Information Bases (MIBs) sup-
ported, MIB Compilation Order, Traps Supported, and MIB Variables supported.

Advertising
This manual is related to the following products:

604, 624, 612, 606, 616