Fsra10(f) and fsra10c(f) controls and indicators – Edwards Signaling FSC Series User Manual
Page 17
Chapter 1: System overview and operation
FSC Series Technical Reference Manual
9
Notes
• You can install remote modules separately or combined in the same electrical
box. For example, a system with a ten-zone control panel typically has one
FSRSI and two FSRZI-SAs installed in a 3-gang electrical box.
• The FSRSI includes a buzzer that sounds a temporal (3-3-3) pattern when
there is an active alarm zone, a slow pulse pattern when there is an active
supervisory zone, and an intermittent pattern when there is a system trouble.
FSRA10(F) and FSRA10C(F) controls and
indicators
Figure 3: Location of the controls and indicators on the remote annunciators
Table 6: Descriptions of the remote annunciator controls and indicators
Item Name
Description
1
Zone active LEDs
Red indicates an active alarm zone. Yellow indicates an
active supervisory zone. Flashing yellow indicates an active
monitor zone.
2
Zone trouble LEDs
On indicates a zone trouble.
3
Power LED
On indicates the control panel has AC power.
4
Fire Alarm LED
On indicates an active alarm zone.
5
Supervisory LED
On indicates an active supervisory zone.
Lamp Test
Power
Fire Alarm
Supervisory
Ground Fault
Trouble
Signal Silence
& Drill
Reset
Ack/Silence
1
2
3
4 5 6
8
9
10
11
7