Edwards Signaling FSC Series - Manual (Page 47)

Chapter 3: Panel programming
FSC Series Technical Reference Manual 39
Step Option Values
LCD first line ALARM TROUBLE SUP POWER DISABLE LCD second line WATERFLO
W
ANN TROUBL
E
BATT TROUBLE GND FAULT SERVICE DETECTOR
001     
002     
003     
004     
005     
006     
007     
008     
009     
010     
011     
012     
013     
014     
015     
17 IDC Code Digit 2 [3]      same as IDC Code Digit
1 X X X X X
18 IDC Code Digit 3 [3]      same as IDC Code Digit
1 X X X X X
19 IDC Code Digit 4 [3]      same as IDC Code Digit
1 X X X X X
20 IDC Label [4]      IDC/Zone XX     
1.  = OFF,  = ON, X = Either.
[2] Available only when the panel’s RRM Multi Mode option is set for Matrix.
[3] Available only when a notification appliance circuit’s NAC Type option is set for Coder.
[4] Available only when an F-DACT(F) is installed.