Edwards Signaling FSC Series - Manual (Page 57)

Chapter 4: Dialer programming
FSC Series Technical Reference Manual 49
The default DST settings adjust the system clock forward one hour on the
second Sunday in March at 2:00 a.m. and back one hour on the first Sunday in
November at 2:00 a.m.
To change daylight saving time settings:
1. Select the Daylight Saving option.
2. Enter Set.
3. For DST Adjustment, enter how many minutes you want the system clock
adjusted when DST begins and ends. The default value is 60 minutes.
Enter 00 minutes to prevent daylight saving time from automatically adjusting
the system clock.
4. For DST Start Month, enter the month that DST begins. The default value is
03 (March).
5. For DST Start Week, enter the week that DST begins. The default value is
2nd.
6. For DST Start Day, enter the day that DST begins. The default value is
Sunday.
7. For DST Start Hour, enter the hour that DST begins. The default value is 02
(2:00 a.m.).
The start hour is in 24-hour format. 00 = 12:00 a.m. (midnight), 01 = 1:00
a.m., 12 = 12:00 p.m. (noon), 23 = 11:00 p.m.
8. For DST End Month, enter the month that DST ends. The default value is 11
(November).
9. For DST End Week, enter the week that DST ends. The default value is First.
10. For DST End Day, enter the day that DST ends. The default value is Sunday.
11. For DST End Hour, enter the hour that DST ends. The default value is 02
(2:00 a.m.).
Selecting a dialer mode
The dialer mode option determines how the F-DACT(F) operates. The values
that you can select are:
• Dual-Line DACT: Dialer is used to transmit event codes to a central station
on LINE 1 and LINE 2, and to perform modem functions/LCD functions.
• Single-Line DACT: Dialer is used to transmit event codes to a central station
on LINE 1 only, and to perform modem functions/LCD functions.