Edwards Signaling FSC Series - Manual (Page 50)

Chapter 3: Panel programming
42 FSC Series Technical Reference Manual
Step Option Values
LCD first line ALARM TROUBLE SUP POWER DISABLE LCD second line WATERFLO
W
ANN TROUBL
E
BATT TROUBLE GND FAULT SERVICE DETECTOR
13 minutes     
14 minutes     
15 minutes     
16 minutes     
17 minutes     
18 minutes     
19 minutes     
20 minutes     
21 minute     
22 minutes     
23 minutes     
24 minutes     
25 minutes     
26 minutes     
27 minutes     
28 minutes     
29 minutes     
30 minutes     
24 NAC Silenceable [5]      No     
Yes (default)     
1.  = OFF,  = ON.
[2] City tie NAC types can’t be silenced or disabled. To inhibit operation of city tie NAC types you must
press the control panel’s Remote Disconnect button.
[3] Class A notification appliance circuits are programmed in odd-even pairs. If you program either circuit as
Class A, NAC type and NAC silenceable values are automatically entered for both circuits.
[4] Does not turn off NACs activated by waterflow, waterflow-retard, waterflow/supervisory, and waterflow-
retard/supervisory zone types.
[5] Does not affect notification appliance circuits whose NAC Type option is set for City Tie or those
activated by a waterflow switch.