3.1 genesis ii direct digital controller, Genesis ii ddc input / output terminals – Innotech Genesis II Digital Controller (v5) User Manual
Page 35
Page 35
Genesis II Installation Instructions
© Mass Electronics Pty Ltd 2010
Chapter 3 – Electrical Installation
3-3.1 Genesis II Direct Digital Controller
Figure 3-2 shows the input/output connection groups for the Genesis II Direct Digital Controller. The
controller uses Phoenix type plug-in terminal strips located around the controller’s perimeter. Both
single row and double row terminals are used. Terminals are grouped by function as follows:
• Power
Input
)
• Digital
Inputs
)
• Digital
Outputs
)
• Analogue
Inputs
)
• Analogue
Outputs
)
• Pulse
Input
)
• Remote Expansion Modules (REM) Connector
)
• RS232 Serial Communications (Comms) Port
• Optional Ethernet Communications Port
• Net & Global Commmunications (Comms, RS485) Terminal (
Figure 3-2: Genesis II DDC Input / Output Terminals