4.4 genii ao rem analogue output module, Genii ao rem analogue output module – Innotech Genesis II Digital Controller (v5) User Manual
Page 53
Advertising
Page 53
Genesis II Installation Instructions
© Mass Electronics Pty Ltd 2010
Chapter 3 – Electrical Installation
3-4.4 GENII AO REM Analogue Output Module
The GENII AO REM Analogue Output Module (Figure 3-8) is powered by 24VAC ±10% @ 50/60 Hz.
Power Consumption is 4VA maximum.
The GENII AO REM provides up to five Analogue Outputs to be connected to field equipment.
Jumpers on the board allow for either Linear 0-10V (maximum load 2mA) or PWM 10Vpp (maximum
load 2mA) output settings for each channel.
Figure 3-8: GENII AO REM Analogue Output Module
Advertising