HP LaserJet 3100 All-in-One Printer series - Manual (Page 209)

208 9 Troubleshooting and Maintenance EN
The message on
the computer
screen says there
was a problem
opening scanner.
Unable to activate
TWAIN source. If you are copying from the software, you
may have the wrong type of parallel port,
or it may not be properly connected to the
computer.
If you are copying from the software,
another device may be conflicting with the
parallel port.
Be sure that you have connected the
parallel cable that came in your package
to the correct parallel port on the back of
your computer. If you have another
parallel port, try attaching the parallel
cable to the other port. Make sure you
have an SPP- (bi-directional) or ECP-
compliant parallel port on your computer.
An SPP parallel port is the minimum; an
ECP parallel port is strongly
recommended. For more information on
your parallel port, please see appendix C
and your computer’s documentation.
The HP LaserJet 3100 product cannot
share a parallel port. If you have a sound
card, external hard drive, or network
switchbox connected to the same parallel
port as the HP LaserJet 3100 product, the
other device may be interfering. You must
unhook the other device to connect and
use the HP LaserJet 3100 product, or you
must use two parallel ports on the
computer. You may need to add another
parallel interface card. An ECP parallel
interface card is strongly recommended.
Please see appendix C or your
computer’s documentation for information
on installing an additional parallel
interface card or resolving conflicts.
Problem Cause Solution