HP LaserJet 3100 All-in-One Printer series - Manual (Page 32)

EN 1 Set Up 31
Step 1 Unplug all devices from their power source.
Step 2 Make sure the HP LaserJet 3100 product is plugged into
the wall socket.
Step 3 Plug a dual adaptor (not included) into the cord for the
HP LaserJet 3100 product.
Step 4 Connecting the device without a British Telecom “Tel”
socket
Plug the device’s cord into one side of the dual adaptor. (This
device is usually an external modem or computer with
internal modem.)
Step 5 Connecting an answering machine
If you are not connecting an answering machine, go to the
next step.
- Or -
Plug the answering machine’s cord into the other side of the
dual adaptor.
Step 6 Connecting a telephone
If you are not connecting a telephone, go to the next step.
- Or -
Plug the telephone’s cord into the “Tel” socket on the
answering machine.
Step 7 Plug all devices back into their power source.
Step 8 Go to “Installing the software” in this chapter.
- Or -
If you are not installing the software now, you must still
set certain settings before using the fax machine. Go to
“Setting required features for standalone fax” in this
chapter.