HP LaserJet 3100 All-in-One Printer series - Manual (Page 91)

90 3 Faxing EN
To retrieve faxes while at a remote location
1 When you arrive at the remote location, pick up the handset of
the fax machine, a telephone connected to it, or any telephone
and dial your fax number.
2 Wait for the fax tones. When you hear a pause between them,
press
* .
3 After you hear three beeps, press # , enter your four-digit
password, and press ** .
4 If your HP LaserJet 3100 product has not received any faxes, it
generates a series of short, rapid tones and disconnects from the
line.
- Or -
If you hear three beeps, there is one or more faxes in memory.
Go to the next step.
5 If you are calling from the handset of the fax machine or a
telephone connected to the fax machine where you want the
faxes sent, go to the next step.
- Or -
If you are at a telephone not connected to the fax machine or
want the faxes sent to a different fax machine, enter that fax
number and press
## .
Note If your HP LaserJet 3100 product is on a PBX system, enter the access
code (usually a 9 or 0) with the fax number.
6 Select one of the following options:
• Press 0# to print the faxes at your current location and then
delete them from your HP LaserJet 3100 product’s memory.
• Press 1# to print the faxes at your current location and save
them in your HP LaserJet 3100 product’s memory.
• Press 2# to print the faxes only at your HP LaserJet 3100
product and delete them from memory.
7 If you are calling from the fax machine where you want the faxes
sent, press
S TART and hang up.
- Or -
If you entered a fax number in step 5, just hang up.
Your HP LaserJet 3100 product implements the option you
chose.