HP LaserJet 3100 All-in-One Printer series - Manual (Page 264)

EN C Changing Parallel Port Modes 263
Dell
www.dell.com
1. While your PC is booting, follow the directions on the screen: “To
enter Setup, press DEL.” (If you have a 486, it may say to press F2).
2. Press ALT + P and choose Parallel Mode.
3. There should be a list of modes available. If ECP is a choice,
choose ECP. Otherwise, choose Bi-directional. (ECP mode will
provide the best printing and scanning performance.)
4. Follow the legend directions for saving and exiting.
Gateway 2000
www.au.gw2k.com
1. While your PC is booting, follow the directions on the screen: “To
enter Setup, press F1.”
2. Click on Advanced on the Menu Bar.
3. Choose Integrated Peripherals.
4. Follow the legend directions and choose ECP if it is a choice for the
mode. Otherwise, choose Bi-directional. (ECP mode will provide the
best printing and scanning performance.)
5. Follow the legend directions to save and exit.
HP Pavilion
www.hp.com
1. At the HP Blue Screen, press F1 to enter Setup.
2. Choose Advanced on the Menu Bar.
3. Following the legend directions, choose Peripheral Configuration
and arrow down to Parallel Port Mode.
4. Choose ECP if it is given as a choice for the mode. Otherwise
choose Bi-directional. (ECP mode will provide the best printing and
scanning performance.)
5. Follow the legend directions for saving and exiting.