HP LaserJet 3100 All-in-One Printer series - Manual (Page 263)

262 C Changing Parallel Port Modes EN
ACER
www.acer.com
1. While your computer is booting, to enter Setup, follow the
directions on the screen: “To enter Setup, press CTRL-ALT-ESC.”
2. Follow the legend on how to scroll through the options.
3. When you reach the Parallel Port Mode option, choose ECP if it is
a choice. Otherwise, choose Bi-directional. (ECP mode will provide
the best printing and scanning performance.)
4. Follow the legend directions for saving and exiting.
AST
www.ast.com
1. While your computer is booting, follow the directions on the screen:
“To enter Setup, press CTRL-ALT-ESC.” (If you have a 486, it may
say to press CTRL-ALT-DEL).
2. Follow the legend on how to scroll through the options.
3. When you reach the Parallel Port Mode option, choose ECP if it is
a choice. Otherwise choose Enhanced. (ECP mode will provide the
best printing and scanning performance.)
4. Follow the legend directions for saving and exiting.
Compaq
www.compaq.com
Pentium computers should already have the parallel port mode in
ECP or bi-directional mode. Refer to your computer’s documentation
for instructions on checking the parallel port mode. If you have a 486,
you may need an external ECP port card.