Lull 1044C-54 Series II Service Manual - Manual (Page 298)

Frame Tilt and Oscillation
7-16 31200079
Frame Level Indicator
Description
Fig. 7-9: Frame Level Indicator
(Ref. Fig. 7-9) The Frame Level Indicator shows the lateral (side-to-side)
angle of the frame relative to level ground. Indicator range is from 0° to 10°
left or right, in increments of one degree. When the ball is centered (0°),
the machine is laterally level. The frame tilt feature may be used to correct
machine angles up to 12.5° to the left or right. See “Frame Tilt Control
Valve” on page 7-3.
Adjustment
Fig. 7-10: Leveling the Frame
1. (Ref. Fig. 7-10) Park the machine on a firm, level surface. Place a
carpenter’s level across the frame rails.
2. Loosen screws securing frame level indicator to its mounting bracket.
Start the engine and adjust frame tilt so the carpenter’s level shows the
frame is level.
0 5
10
5
10
H1004
K
1
026
Carpenter’s Level